I'd like to wish all the readers that read and follow my blog, a Merry Christmas and a Happy New Year. Its been a very strange year....a great release of Revit from Autodesk in the shape of Revit Architecture 2009, global economic down turn, a new era in US politics, banks collapsing, the olympics, a career change, being told I look like Nik Kershaw......the list goes on..........roll on 2009! :-)
This is one that seemed to miss my radar during AU2008! The Ideate Explorer for Revit 2009 is a utility which allows you to search, filter and tie up the inter relationships within your model.
As mentioned on the Ideate Website.....
"Ideate Explorer for Revit® 2009 from Ideate, Inc. empowers you to do just that. Explorer gives you an easy, intuitive and profound way to search, quantify and select elements in a Revit model."
More details can be found here.....
Here's an interesting modelling challenge set by one of my colleagues in the London Office. She wanted to quickly produce a balcony, based on the sketch below, for a large high rise residential scheme. In reality this is reasonably straight forward modelling, but it may not seem that obvious on closer inspection, especially to those that are new to Revit.
You will see from the diagram above that the majority of the balcony is 450mm deep and is flat as indicated by the blue area. The balcony then falls away on three edges to only 150mm thick. You will also notice the balcony is not rectilinear as indicated, with three sides at different angles.There are a number of different ways to tackle this.... create a family, an in-place family? All have their merits, but at the concept stage of a project you don't always have time to produce what in essence is actually a rather complex family to create. So the easiest way to create the balcony is in four separate elements.
So start by sketching out a few reference planes to define the extent and shape of the balcony.
Next create a new floor slab type which is 450mm thick. Edit the type properties of the construction of the floor slab and set the structure "variable" radio button is ticked. This will ensure that that slab is flush on the underside after you have edited the slab.
Next model four separate slabs based on the reference plane sketches.
You can then slab edit the edges of the three slabs which need to slope away using the sub-element edit tools. Select one of the floor slabs you created and the sub-element edit tools will appear in the options bar.
Next select the edit points/edges tools, then select the outer edge of the slab you want to edit and alter the elevation from 0mm to -300mm; this will drop the whole edge of the slab and it will slope as required.
Now do this for all the other edges which need to fall away.
For extra finesse, use the join geometry to clean up all the floor slabs.
One could argue that this is not a purist approach to the BIM problem because you end up with four slabs rather than one, but at that concept stage where you want to convey an idea, this approach is ideal.
Released at AU2008, CADSmart have produced a skills assessment tool for Revit 2009. As described on there website; "CADsmart Premier is our premium level software, providing a range of unrivalled tools for training needs and skills gap analysis. The sophisticated data provided by CADsmart allows firms to benchmark CAD skills across offices, disciplines and against industry standards."
The key features are as follows:-
CADSmart is an interesting approach to testing existing as well as future staff. As the industry starts to get flooded with Revit savvy users, firms need an assessment tool to make sure that users can actually deliver on what they promise. If you want more details go to:-
I bumped into Chris Senior from Revit Factory whilst I was at AU2008. He informed me that the website has been re-branded and re-launched.
Chris let me know that they are currently developing a corporate library section for Companies to host private libraries alongside the public library and this should be completed by the new year.
They have also included an RSS displayer for the site and this is allowing them to like back to over Revit web resources. If you want your site reference, drop Chris an email.
Chris also mentioned that the content section has only been live for 1 week but they are now receiving 100+ hits per day. There member sign-up rate has quadrupled in the last few weeks from an average of 10 members per week to 40. The content is very much UK focused, so for those that are struggling to find suitable UK content for Revit, check the site out.
